Ensure all equipment is powered off before making any connections.Connect the mixer to the amplifier by running XLR cables from the mixer's Main Left and Main Right outputs to Channel 1 and Channel 2 inputs on the amp.
Connect the speakers to the amplifier's speaker outputs using the appropriate speaker cables.
Power on the system in the correct order:
Turn on the mixer and other audio equipment first.
Turn on the amp last.
Set the amplifier levels by turning both channel level controls to approximately the 12 o'clock position to start. Play audio through the mixer and gradually increase the main volume level until the desired volume is reached without distortion. If the Clip indicators illuminate continuously, reduce the mixer output or amplifier level.
Power off the system by turning off the amplifier first, then the mixer and other audio equipment. This helps prevent loud pops from reaching the speakers.